field of human life.
So far, people must find the solution about the problems of printing time, materials of ink, colors and stiffness of materials of 3D printer but it is not a big deal. Though this problems prevent 3D printers form mass-producing the stuffs, diversified small-quantity production is possible with present technology fortunately. The stiffness of materials is 80 percent of the s
LASER의 발견
레이저의 시작은 아인슈타인이 제안한 ‘유도방출 이론’에서부터였다. 그는 닐스 보어의 자발방출과 다른 유도방출을 제안했고, 훗날 이것이 레이저의 중요한 기초 원리가 된다.
유도방출이란 외부에서 들어오는 빛(광자)의 부추김에 의해 높은 에너지의 원자가 낮은 에너
Manipulation of a micro-object by using an optically driven mircroneedle.
Fig 5.(a) Pushing a micro-object with an arm of the microneedle.
Fig 5.(b) Pricking a micro-object with a submicron probe tip of the microneedle.
The probe tip was sufficiently strong to prick the micro-object.
The elongation of individual polymers is observed through use of fluorescently labeled DNA molecule
Ⅰ. 테크놀로지예술
현대 테크놀로지 예술은 제3산업사회와 더불어 전기, 전자, 비디오, 레이저, 홀로그램, 컴퓨터 등 발달된 첨단 테크놀로지 시스템이 직접 예술 속에 도입되어 하나의 예술적 시스템을 형성하게 된다. 이러한 연유로 해서 현대 테크놀로지 예술은 <시스템 예술>이라고도 불리 운다.
- How to send the lenses into orbit, in one piece. Since conventional rocket systems with fossil fuel are expensive and polluting, professor Angel hopes to use a coil gun. While it could take 30 years to perfect, this technology might possibly be a revolutionary breakthrough in space travel. Angel's plan is for 20 coil guns to be built around the world, buried deep in mountains. The vertical gun
1. Objective
이상적인 렌즈에서는 한 물점에서 나간 광선들이라면 초점면에서 하나의 점으로 정확하게 맺혀야 한다. 하지만, 우리가 사용하는 렌즈들은 곡률 등의 특성을 가진 렌즈이므로 렌즈를 통과할 때 초점면에서 상점이 달라지게 되고 따라서 이로 인해 수차가 생기게 된다. 여러 가지 실험을 통
1. Experiment Date & Time
Do experiment : 2009. 11. 7 ( 9:00 p.m. ~ 11:30 p.m. )
1) Convex Lens
2) Compound Lens
3) Zoom Lens
4) Aperture Stop & Field Stop
2. Location
Science Hall 618
3. Result & Interpretation
이번실험은 렌즈의 각 조건에 따라 스크린에 맺히는 상까지의 거리와 상의 크기를 측정하여 렌즈에 의해 맺히는 상형성을
2. 1번에서 구한 속도장으로 Mean recirculation region(Wake bubble)의 길이를 구하라. (Grid보다 작은 값은 Interpolation을 해야 함.) 그리고 이 값의 의미를 설명하라.
2.1 Wake bubble의 의미
유체가 실린더 표면을 흐를 때 압력차이의 효과가 shear stress에 의한 효과보다 비교적 크게 작용하기 때문에, 실린더 전방부에
그림 1을 보면 알 수 있듯이 SrTiO3는 ABO3의 Perovskite 구조로써 단위결정의 각 모서리에 Sr 이온이 위치하고, 각 면심에 산소 이온, 중심에 Ti 이온이 있는 구조이다. Perovskite 구조를 갖는 금속산화물은 전기를 통하지 않는 절연체 성질로부터 반도체 성질 및 전기를 통하는 금속의 성질뿐만 아니라 초전도 현
0. 실험 개요
0.1. 실험 요약
유동 장에서 유동의 속도 분포를 정확하게 파악하는 것은 매우 중요한다. 비행기의 날개 주위에 생기는 유동, 잠수함 주위의 유동, 긴 송유관 내에서의 유동 등에서 속도 분포는 설계나 효율성 측면에 있어 매우 큰 영향을 미친다. 그러나 피토 튜브나 Hot-wire, LDV(Laser
Dop